MONOPRICE HDMI to Single Link DVI-D Adapter Cable with Ferrite Cores

Monoprice HDMI to DVI adapter cables connect HDMI-equipped devices to Single Link DVI-D displays commonly found on PCs, projectors, and older video equipment. Ferrite cores are included to suppress EMI/RFI interference, and 28 AWG conductors are used in several variants. These cables transmit video-only signals and do not carry audio; use a separate audio connection if needed. Some variants feature CL2-rated jackets for in-wall installation and different lengths or pack quantities to suit installation or consumer needs. Ideal for projector setups, PC-to-display links, and other video-only applications requiring HDMI-to-DVI conversion.

• This cable is capable of the following HDMI video features:1080p Resolution - The High Speed HDMI Cable has sufficient bandwidth to transfer 1080p video signals between 1080p rated source and sink (display) devices
• This is the simplest and cheapest form of electronic noise reduction and is most effective on small gauge cabling which is inherently more susceptible to electronic noise interference than thicker cables
• They are used to suppress EMI/RFI electronic noise on the cable by absorbing the unwanted high frequencies and dissipating them as very low-level heat
• Ferrite Cores are small magnetic blocks wrapped around the end of a cable
• They carry video signals only! If you are looking for a High Speed HDMI Cable or a Standard HDMI Cable to connect equipment with HDMI
• These cables can NOT carry audio. Voltage Rating 30V and Temperature Rating 80 Degrees Celsius
• This is specifically for connecting a device with an HDMI connector to another device equipped with a Single Link DVI-D connector typically found on PCs projectors and older video equipment before the HDMI standard became widespread
• !!! WARNING !!! Note that this cable is NOT an ordinary HDMI cable
• The information below is per-pack only